GOOP XR Façade Protection System
TEMPORARY PROTECTION FOR GLASS, ALUMINIUM AND SELECTED FINISHED SURFACES – INSTALLED, AND MANAGED FOR LIVE CONSTRUCTION ENVIRONMENTS.
THE REALITY
Construction environments are unpredictable.
Surface damage isn’t a product issue — it’s a system failure:
-
substrates vary
-
coatings differ
-
conditions change
-
application is inconsistent
That’s where most protection systems fall down.
WHAT GOOP XR ACTUALLY IS
Critical for sensitive façade surfaces such as Low-E glass and anodised aluminium where incorrect protection can cause permanent damage.
GOOP XR is a peelable protective coating designed for temporary protection of non-porous construction surfaces:
-
glass (including tinted, Low-E, and coated)
-
powder-coated and anodised aluminium
-
PVC joinery
-
selected finished surfaces
Forms a removable film that protects against:
-
plaster and mortar contamination
-
paint overspray
-
construction debris
-
general site damage
WHERE MOST PRODUCTS FAIL
Most protection products rely on:
-
‘apply and hope’ approach
-
no visibility of site conditions
When issues occur — responsibility becomes unclear.
No Documentation
No Condition Record
No Control of Environment
THE SHIELDIT DIFFERENCE
ShieldIt does not rely on product claims — we control how protection performs on site.
Every GOOP XR installation is supported by:
- pre-install condition assessment
- controlled application methodology
- environmental condition awareness
- documented installation
- managed removal process
This turns protection into a managed system — not a risk- — with documented accountability at every stage.
1
Assessment
-
Façade materials and finishes
-
Exposure conditions
-
Programme duration
-
Access constraints
2
System Selection
-
Compatibility with substrates
-
Duration suitability
-
Warranty alignment
3
Installation & Documentation
-
Controlled system application
-
Condition recorded at install
4
Monitoring
-
Ongoing inspection
-
Adjustments as works progress
5
Removal & Verification
-
Controlled removal
-
Final condition confirmation
ENVIRONMENTAL & SITE CONDITION ASSESSMENT
Application is carried out with consideration of site conditions at the time of install, including:
-
surface condition
-
ambient and surface temperature
-
moisture presence
-
exposure and site activity
Where required, Condition assessed and recorded where required to support application decisions and project documentation.
This approach supports appropriate product selection, application timing, and risk control during installation.
SUBSTRATE CONTROL
GOOP XR is designed for use on non-porous substrates, maybe subject to site-specific testing.
However:
-
coating systems vary
-
surface age and condition varies
-
environmental exposure differs between projects
Where substrate type or coating system is unknown:
Site-specific testing maybe required prior to full application.
PERFORMANCE
-
Peelable film system
-
Water-based application
-
Designed for temporary protection during construction
-
Suitable for extended exposure periods depending on site conditions and application
-
Removal assisted with water where required
